:: DEFINE | Management Consultancy & Training Provider In UAE, Abu Dhabi,Dubai,Saudi Arabia ::

PROCESS EQUIPMENT SIZING & SELECTION TRAINING

Location

Dubai, UAE

Date

From Date: 13-Jan-2025
To Date: 17-Jan-2025

Duration

5 days

Language

English

Discipline

PROCESS ENGINEERING, WATER DESALINATATION AND CHEMICAL ENGINEERING

Introduction

Owing to their important role in nearly all industrial processes, sizing and selection of new equipment like thermal equipment (boilers, steam heat exchangers, fired gas heater, rotating equipment (pumps, turbines, gas and air compressors, are critical to both process efficiency and investment. The course highlights the relation between processes demands and suitable equipment sizing and selection. The piping system design required for each equipment will be studied. The course presents the major types of this equipment and demonstrates their recent technological aspects for installation, operation, maintenance & troubleshooting.

Objective

To lay out the major types of process plant equipment and process variables
To illustrate methods of estimating processes plant demand, such as:
1. Thermal energy and steam consumption
2. Air consumption
3. Boiler feed water treatment
Demonstration of advanced information in basic design issues for major equipment
To present the main requirements for installation and good operability concerning each type of equipment
To study sizing and selecting of equipment properly
To clarify the vital role of different types of maintenance regimes in successful and continuous production operation
To present examples of troubleshooting through some case studies

Audience

Engineers of any discipline, managers, technician, technologists, and other technical personnel.

Content

Boilers

Boiler house
Various types of boilers
The ancillary equipment and their integral role in the safety of the boiler
Correct operation, control procedures for safe operation.
Inspection and maintenance program
Minimize forced outages and prevent serious damage to boiler equipment.

Boiler water treatment

Harmful effects from improper treatment.
Sizing and selection of water treatment plant
External and internal water treatment
Boiler deposits & blowdown control.
Steam consumption
Steam engineering principles and heat transfer
Methods of estimating and measuring steam consumption
steam consumption of plant items: tanks, vats, air heaters and heat exchangers

Steam distribution and condensate return

Heat exchangers

Main types of heat exchangers and their primary components
Specifying design requirements and design of primary exchanger components
Heat exchanger selection
The heat load, heat exchanger and steam load relationship
Oversized heat exchangers
Practical methods of preventing stall
Typical inspection procedures: locating leaks, tube inspection techniques, eddy current testing, ultrasonic examination.

ROTATING EQUIPMENT:

Pumps

Pump types, characteristics and operation
Classification of pumps
Specific speed and pump type
Sizing and selection of pumps
Pump characteristics: head, capacity, power, efficiency, total system head and curves
Centrifugal pump construction features
Net positive suction Head (NPSH) and cavitation
Pipeline design

Turbines

Turbine types and applications
Major components of a turbine
Turbine design and construction
Governor
Lubrication, vibration analysis, bearing temperature.
Turbine control
Erection of a turbine
Turbine piping

Air Compressors

Assessment of air consumption of plant
Sizing and selection of compressor plant
Selection of compressor ancillary equipment
Compressor installation
Main line installation
Final service line installation

Processes control

Applying predictive maintenance regime

Maintenance and Inspection

Troubleshooting (case study)

TRAINING OUTCOME

By end of the training participants will be able

To lay out the major types of process plant equipment and process variables
To illustrate methods of estimating processes plant demand, such as:
1. Thermal energy and steam consumption
2. Air consumption
3. Boiler feed water treatment
Demonstration of advanced information in basic design issues for major equipment
To present the main requirements for installation and good operability concerning each type of equipment
To study sizing and selecting of equipment properly
To clarify the vital role of different types of maintenance regimes in successful and continuous production operation

NOTE:

Pre & Post Tests will be conducted.

Case Studies, Group Exercises, Group Discussions, Last Day Review &Assessments will

be carried out.

Certificate

Define Management Consultancy & Training Certificate of course completion will be issued to all attendees.

Methodology

A highly interactive combination of lectures and discussion sessions will be managed to maximize the amount and quality of information and knowledge transfer. The sessions will start by raising the most relevant questions and motivating everybody to find the right answers. You will also be encouraged to raise your own questions and to share in the development of the right answers using your own analysis and experiences. Tests of multiple-choice type will be made available on a daily basis to examine the effectiveness of delivering the course.

All presentations are made in excellent colorful power point. Very useful Course Materials will be given.

30% Lectures
30% Workshops and work presentation
20% Group Work& Practical Exercises
20% Videos& General Discussions

Course Details