• info at definetraining.com
  • +971 2 626 44 55

Course Details

HEATING, VENTILATION & AIR CONDITIONING (HVAC) SYSTEMS DESIGN, INSTALLATION, MAINTENANCE & TROUBLESHOOTING

Location
Dubai, UAE
Date
From Date: 13-Jun-2021   
To Date: 17-Jun-2021
Duration
5 Days
Language
English
Discipline
Introduction

Ref No:        REFME093
Title:            Heating, Ventilation & Air Conditioning (HVAC) Systems Design, Installation, Maintenance & Troubleshooting
Start Date:   13 June 2021  End Date: 17 June 2021  
Venue:         Dubai, UAE
Fee:              $4,500

In any of the 5 star hotels. The exact venue will be informed once finalized.

This program is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to the fundamentals of Heating, Ventilation and Air-conditioning. It commences with a review of psychometric charts and then examines the factors that influence design choices, indoor air quality, load calculations and heating/ventilation and air-conditioning systems. Numerous tips and tricks throughout the program make it very practical and topical to your applications. 

Either it is a small warehouse or a complex high-rise building, there is an increasing demand by Owners and Engineers to design and install the HVAC systems in a more efficient and cost-effective manner. Due to the on-going advances in HVAC & R technology, this demand is becoming a must and often controlled by new governmental regulations and engineering codes. 

Realizing this need and the importance of the subject, Define is introducing this specialized program concentrating on two important subjects:-

The details of heat load calculations, selection of appropriate equipment/system and the design of the ducts and piping networks.
A comprehensive design case study of a complete cold store including heat loads of individual rooms and the total cold store, selection of the appropriate equipment, design of the best layout including handling areas. 

By the end of this program, participants will have enough knowledge to implement their daily assignments correctly and professionally.

Objective

The aim of this program is to provide the participants with a complete and up-to-date overview of the area of Heating, Ventilation and Air-conditioning (HVAC). It commences with a review of psychometric charts and then examines the factors that influence design choices, indoor air quality, load calculations and heating/ventilation and air-conditioning systems. Numerous tips and tricks throughout the program make it very practical and topical to your applications. Upon the successful completion of this program, the participant will be able to:

  • Maintain and troubleshoot HVAC systems
  • Understand and apply the psychometric chart
  • Design for good air quality
  • Perform basic load calculations
  • Initiate an effective inspection and maintenance program
  • Minimize forced outages and prevent serious damage to HVAC equipment
  • Provide an overview of the legislative requirements plus the essential steps and responsibilities for the maintenance and repair of HVAC Systems
  • Outline the technologies available for the efficient energy management using HVAC systems
Audience
  • Maintenance Engineers, technicians and staff
  • Plant engineers
  • Operation, maintenance, inspection and repair managers, supervisors and engineers
  • Mechanical engineers and technicians
  • Design engineers ,electrical engineers and technicians, consulting engineers
Content

COURSE OUTLINE

  1. HVAC Design, Maintain and troubleshoot
    1. Heat load of a room.
    2. Heat load of a multi room complex.
    3. The cooling capacity.
    4. The airflow rate.
    5. The fresh air requirements.
    6. The DX systems.
    7. The chilled water systems.
    8. Chilled water flow rates & piping sizing.
  2. HVAC Design
    1. Chilled water pumps selection.
    2. Building Management System and Control System
    3. DX system piping sizing.
    4. Typical piping connections "DX units, chillers, pumps, AHU's and FCU's".
    5. Insulation thickness & the criteria for condensation prevention.
    6. Duct sizing
    7. Air filtration.
  3. Maintain and troubleshoot & Cold stores design
    1. The behavior of the fruit/vegetable after harvesting.
    2. How cold stores can extend the life of the products.
    3. How to decide the cold room dimensions
    4. The heat load of the cold room. (Chilling, frozen products, Potato and Onions)
  4. Cold stores design
    1. Pre-cooling. "Wet cooling".
    2. Selection of the refrigeration system components.
    3. The insulation panels and doors.
    4. The docks "Levelers, shelters and doors".
    5. Ventilation for potato and onions.
    6. Reference data and tables.
  5. Operation and Maintenance
    1. Documentation
    2. As built hand over package documentation after completion of installation
    3. Records and book keeping
    4. PMR forms "Preventive maintenance routines"
    5. Questions and answers
    6. Case study

TRAINING OUTCOME

  • Upon the successful completion of this program, the participant will be able to:
  • Maintain and troubleshoot HVAC systems
  • Understand and apply the psychometric chart
  • Design for good air quality
  • Perform basic load calculations
  • Initiate an effective inspection and maintenance program
  • Minimize forced outages and prevent serious damage to HVAC equipment
  • Provide an overview of the legislative requirements plus the essential steps and responsibilities for the maintenance and repair of HVAC Systems
  • Outline the technologies available for the efficient energy management using HVAC systems

NOTE:
Pre & Post Tests will be conducted
Case Studies, Group Exercises, Group Discussions, Last Day Review & Assessments will be carried out.

Certificate

Define Management Consultancy & Training Certificate of course completion will be issued to all attendees.

Methodology

A highly interactive combination of lectures and discussion sessions will be managed to maximize the amount and quality of information and knowledge transfer. The sessions will start by raising the most relevant questions, and motivate everybody find the right answers.The delegates will also be encouraged to raise their own questions and to share in the development of the right answers using their own analysis and experiences.

  • 30% Lectures
  • 30% Workshops and work presentation
  • 20% Group Work& Practical Exercises
  • 20% Videos& General Discussions
Fees
4,500 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch

We help you to unlock & unleash the power within your large scale Trainings