:: DEFINE | Management Consultancy & Training Provider In UAE, Abu Dhabi,Dubai,Saudi Arabia ::

INDUSTRIAL SUBSTATION MAINTENANCE

Location

London, UK

Date

From Date: 15-Apr-2024
To Date: 19-Apr-2024

Duration

5 Days

Language

English

Discipline

Introduction

Ref No: EE075
Title:    Industrial Substation Maintenance
Start Date: 15 April 2024  End Date: 19 April 2024
Venue: London, UK
Fee:   $6,500

In any of the 5 star hotels. The exact venue will be informed once finalized.

Objective

Substation types, applications, components and safety procedures
Medium-voltage circuit breaker maintenance and testing methods
Perform insulation resistance, contact resistance on air, oil and vacuum breakers, and tank loss index on oil circuit breaker and vacuum bottle integrity tests on vacuum breaker
Switchgear arrangement, torque requirements, insulation systems and maintenance intervals
Perform switchgear inspection and maintenance in lab
Battery types, applications, systems and components
Perform battery maintenance and testing in lab

Audience

This course is intended for Electrical Engineers, Electrical Supervisors and Electrical Technicians engaged in the commissioning, testing, start-up, troubleshooting, maintenance and repair of Electrical Equipment and Control Systems. Because the methods and examples are generic, trainee from all industries especially oil and gas fields will benefit. Participants need no specific requirements other than good understanding of electricity and magnetism and some relevant experience.

Content

DETAILED COURSE OUTLINE

Day-1

Introduction
- Student introduction
- Purpose Of Electrical Maintenance
- The golden triangle of Maintenance
- Electrical safety rules
- Pre test
Electrical Distribution System
- References
- Distribution System Back ground
  - Transmission system configuration
  - System types
    - Radial systems
- Substation rating & Arrangements
- Verifying correct condition and operation of the switchgear
  - Visual Inspections
  - Mechanical Inspections and Tests
  - Electrical Tests
  - Functional Operation Test
  - Review of Testing and Inspection Results
  - Trouble shooting

Day-2

Air Circuit Breaker
- Construction
- Operation C/H
- Rating And name plate data
- Protection C/H
- Applications
Vacuum Circuit Breaker
- Construction
- Operation C/H
- Rating And name plate data
- Protection C/H
- Applications
Oil Circuit Breaker
- Construction
- Operation C/H
- Rating And name plate data
- Protection C/H
- Dissolved Gas Analysis
- Applications
Verifying Correct Condition , Maintenance And Operation Of Air , Vacuum & Oil Circuit Breakers
- Visual Inspections
- Mechanical inspection and tests
- Electrical Tests
- Review of testing and inspection results

Day-3

Power Transformers
- Transformers types
  - Distribution transformers
    - ANSI Liquid filled
    - Unit and substations transformers
    - Pad Mounted transformers
  - Single and three phases
  - Power transformers ;large, medium and small transformers
  - Voltage Transformer (VT) and current transformers (CT’s)
- .Accessories & Protective Devices
  - Double Float Buchholz relay
  - Dial Type Contact Thermometer
  - Magnetic oil –Level Indicator
  - Protective devices for hermetically sealed transformers
  - Pressure Relief device
  - Dehydrating Breather
  - Bushing Current transformer
  - Additional accessories
  - Protective relaying
- General diagnostic
  - Insulation Resistance and Polarization Index
  - Turns Ratio and Excitation Current
  - Capacitance and Power Factor
  - Winding Resistance
  - Recovery Voltage Measurement
  - Frequency Response Analysis
  - Interpretation of test results
  - Oil Quality Analysis
  - Dissolved Gas Analysis
- Lightining Arrestors
  - Types
  - Inspection
  - Testing

Day-4

Ground Grid Systems
- Purpose
- Grounding theory
- Types of test equipment
- • Inspection
- Testing

Day-5

Batteries and Chargers
- Types of station batteries
- Battery systems
- Maintenance
- Inspection
Open session for questions, answers and case studies

TRAINING OUTCOME

At the end of this training Participants will be able to: Following the attendance at this course, participants will return to their respective organizations equipped with new or refreshed skills to ensure that each power components related to the industrial substations are tested and maintained in a fashion that ensures reduced costs and or start-up delays plus identified faults or problems are repaired and the underlying causes are identified and eliminated to reduce further failures.

NOTE: Pre & Post Tests will be conducted
Case Studies, Group Exercises, Group Discussions, Last Day Review & Assessments will be carried out.

Certificate

Define Management Consultancy & Training Certificate of course completion will be issued to all attendees.

Methodology

This training program is lecture-based and customized to the needs of the audience, providing meaningful experience for personnel that work in petroleum plants. Daily sessions include formal presentation, prepared in the Power Point, interspersed with directed discussions and case studies. In addition to formal lectures and discussions, the delegates will learn by active participation through the use of problem-solving exercises, group discussions, analysis of real-life case studies etc. All attendees receive a course manual as a reference

30% Lectures
30% Workshops and work presentation
20% Group Work& Practical Exercises
20% Videos& General Discussions

Course Details