:: DEFINE | Management Consultancy & Training Provider In UAE, Abu Dhabi,Dubai,Saudi Arabia ::

DRILLING PROBLEMS AND OPTIMIZATION TRAINING

Location

Kuala Lumpur, Malaysia

Date

From Date: 26-Aug-2024
To Date: 30-Aug-2024

Duration

5 days

Language

ENGLISH

Discipline

DRILLLING

Introduction

Today's drilling personnel must have a working knowledge of all the required disciplines in order to effectively drill a well. This Drilling Problems and Optimization training seminar provides all the fundamentals necessary to drill a well whether it is a shallow well or a complex, high pressure well.

This training course is also designed for engineers and field personnel involved in the planning and implementation of drilling programs. This covers all aspects of drilling problems, emphasizing prevention and optimizing planning and implementation of all drilling parameters.

This training builds a firm foundation in the principles and practices of drilling and well planning, drilling fluid, drill string design, hydraulic optimization and drilling hole problems. Participants will learn the components of drilling string and how to use each in optimum ways, how to evaluate the WOB and select the proper size of drill collar. Participants will also be able to apply the practical solution for analyzing the performance of drill string design for both vertical and direction holes.

Objective

By the end of this training seminar, participants will be able to:

Drill a well cost effectively and maximize penetration rate & Evaluate stuck pipe problems and avoid potential problems by optimizing hole cleaning and ROP
Design, drill string and BOP / wellheads & Design and implement bit and hydraulics programs BHA design for proper deviation, directional and horizontal drilling control & Recognize and evaluate well control problems by effectively using Mud Logging principles and techniques

Audience

This training seminar is suitable to a wide range of professionals but will greatly benefit:

Drilling Engineers
Well Site Supervisors
Drilling Contractors
Drilling Supervisors
Trainee Drillers
Rig Engineers

Content

This Drilling Problems and Optimization training will utilize several learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative. The following advantages would be achieved:

Avoid or minimize the operational daily drilling problems
Reduction in the cost of the well and avoiding the risk
Enhancing the overall well performance
Extending the well life and control it
Ensuring the well integrity
Obtain integrating knowledge to mitigate and eliminate the drilling problems
Proper well control, in addition, how to predict and analyzing all the warning signs to eliminate all kinds of problems

TRAINING DAILY OUTLINE

DAY 1

Drilling Hole Problems and Solutions
Hole Problems (stuck pipe, lost circulation)
Impact of Hole Cleaning on Hole Problems
Stuck Pipe Types
Formation and Problems Related
Preventive Measurements
Fishing Tools and Impact on Stuck Pipe
Lost Circulation and Types
How to Solve the Problem?
Exercise

DAY 2

Preventing Wash out and Twist Off
How do you analyze the true pressure loss of a Washout?
Bit Selection and Hydraulics Application, including Nozzle Selection
Bit Types
Rolling Cutter Bits
Polycrystalline Diamond Bits
Standard Classification of Bits
Breaking the Bits
Optimising Drilling Performance
Drill String Dynamic / Vibration
Factors related to Bit Run Termination
Bit Hydraulic
BHA and Drill String Design
Drill Strings design
Functions of Drill Pipe, Drill Collars and BHA selection
Grades of Drill Pipe and strength properties
Basic Design Calculations

Exercise

DAY 3

Drilling Fluids Planning and Control
Lifting capacity of Drilling Fluids, Pressure losses in the Circulating System and ECD
Functions of the Drilling Fluids, Impact of Hydraulic on the Drilling Optimization
Parameters affecting on the Drilling Penetrations
Drilling Fluid Properties, Functions of Drilling Fluid
Mud Properties and Problems related to Mud Properties
Exercise

DAY 4

Well Control operation
Well Control Kill Sheet
BOP Equipment functions
Hydro-dynamic Pressure
Equivalent Circulating Density
Mud Weight Maintenance
Kicks and Detection
Causes of Kicks while Drilling
Indication of Induced Kicks
Best Kill Procedure for Kick Type
Causes of Kicks while Tripping
Diverter Guidelines while Tripping
Underground Blowout
Indication of Underground Blowout
Exercise

DAY 5

Planning Including Mud Logging Requirements

Shale instability
Modern Mud Logging Unit
Gas Analysis
Cutting Evaluation
Shale Bulk Density
Problems Prevention
Exercise

NOTE:

Pre & Post Tests will be conducted

Case Studies, Group Exercises, Group Discussions, Last Day Review & Assessments will be carried out.

Certificate

Define Management Consultancy & Training Certificate of course completion will be issued to all attendees.

Methodology

A highly interactive combination of lectures and discussion sessions will be managed to maximize the amount and quality of information and knowledge transfer. The sessions will start by raising the most relevant questions, and motivate everybody find the right answers. You will also be encouraged to raise your own questions and to share in the development of the right answers using your own analysis and experiences. Tests of multiple-choice type will be made available on daily basis to examine the effectiveness of delivering the course.

Very useful Course Materials will be given.

30% Lectures
30% Workshops and work presentation
20% Group Work& Practical Exercises
20% Videos& General Discussions

Course Details