:: DEFINE | Management Consultancy & Training Provider In UAE, Abu Dhabi,Dubai,Saudi Arabia ::

GAS FIELD OPERATIONS

Location

Kuala Lumpur, Malaysia

Date

From Date: 04-Mar-2024
To Date: 08-Mar-2024

Duration

5 Days

Language

English

Discipline

PROCESS ENGINEERING

Introduction

TRAINING INTRODUCTION:

The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology, which involves several production operations such as dehydration, acid gas removal, recovery of natural gas liquids, and the production of liquefied natural gas. In addition, one involved in such an industry needs to be familiar with different gas sources, specifications, storage requirements, transportation, and distribution.

TRAINING DESCRIPTION:

This course will start by defining what natural gas is, its properties, specifications, and end-use. Then, typical gas processing operations will be discussed, including dehydration, acid gas removal, recovery of ethane, propane, and NGL (natural gas liquids), and liquefied natural gas (LNG) operations. Sulfur recovery will also be discussed. Typical equipment and facilities that are found in typical natural gas processing operations will also be discussed including compressors, vessels, relief systems, and safety systems.

This short course is designed to give the attendants the fundamentals of natural gas handling systems and facilities including some of the details of the process. Specifically, by attending this course you will:

Gain a deep knowledge of the properties, specifications, and end uses of natural gas.
Gain a deeper understanding of typical natural gas processing operations, including:
- Dehydration
- Acid gas removal
- Recovery of ethane, propane, and NGL (natural gas liquids)
- Sulfur recovery

Gain a deeper understanding of the production of liquefied natural gas (LNG).
Gain a deeper knowledge of the different equipment and facilities found in natural gas processing plants.

Objective

Upon attendance to the Oil & Gas Field Operations training course, the participants will be able to:

Gain an overview of global oil & gas related statistics
Gain an overview of the upstream operations and related facilities
Understand various methods and techniques used in the Oil & Gas Fields to explore, drill, produce, treat and transport oil, gas and their products
Gain knowledge about reservoir behavior such as pressure, temperature, rock and fluid properties and different recovery methods
Identify the types and purpose of production equipment such as wellheads, Manifolds, separators, chemical injection, pipelines, pig launchers and receivers, heat exchangers, valves, pumps and compressors
Be familiar with emulsion problems and treatment
Increase understanding in water and gas injection technology for pressure maintenance.
Have knowledge of the following: Characteristics of Crude Oil, Oil & Gas Separation, The Petroleum Production Facility
Understand gas dehydration and processing, absorption, refrigeration and fractionation, cryogenics and LNG production
Understand various field facilities from the reservoir to end users
Understand oil & gas separation operations and troubleshooting
Understand various production and recovery techniques and methods
Gain an understanding with regards to evaluating oil & gas reserves, artificial lift and enhancing recovery
Get a general feel for conducting an economic evaluation on field development projects including risk analysis

Audience

Technical and non-technical personnel involved in the activities of the natural gas industry. Specifically, technical, operations, and maintenance personnel who had limited exposure in this area, or professionals involved in other areas of the gas industry who require a comprehensive overview of natural gas processing will find this course ideally suited for them.

Content

Day One:

What is natural gas?
Origins
Properties
Specifications
End uses and markets for natural gas
Environmental advantages
Physical behavior of natural gas systems
Physical and thermal properties
Phase behavior analysis
- Pure substances
- The phase rule
- Behavior of mixtures
- Vaporization by gas pressure
- Molecular theory of gases and liquids
- Natural gases
- Density of natural gas
- Density of liquids
- Dense phase
- Surface tension
- Viscosity
- Thermal conductivity of gases
- Thermodynamic properties
- Sampling and analysis

Day Two:

Natural gas processing plant

Flowsheet
Equipment and components

Heat exchange in gas processing

Heat transfer theory
- - Mechanisms of heat transfer
  - Process heat duty
- Heat exchangers types
  - Shell and tube
  - Double-pipe
  - Plate and frame
  - Aerial coolers
- Fired heaters
- Heat recovery units

Day Three:

Hydrates
- Determination of hydrate formation temperature or pressure
- Condensation of water vapor
- Temperature drop due to gas expansion
- Thermodynamic inhibitors
- Kinetic inhibitors and anti-agglomerates
Low-temperature Exchange (LTX) units and line heaters
- LTX units
- Line heaters
- Heat duty
- Fire-tube size
Condensate stabilization
- Partial pressure
- Multistage separation
- Multi flashes
- Cold feed distillation tower
- Distillation tower with reflux
- Condensate stabilizer design
- Trays and packing
- Condensate stabilizer as a gas processing plant
- LTX unit as a condensate stabilizer

Day Four:

Acid gas treating
- Gas sweetening processes
  - Solid bed absorption
  - Chemical solvents
  - Physical solvent processes
  - Direct conversion of H2S to sulfur
  - Sulfide scavengers
- Process selection
- Design procedure for iron-sponge units
- Design procedure for amine systems

Amine absorber
Amine circulation rates
Flash drum
Amine reboilers
Amine stripper
Rich/lean amine exchanger
Amine cooler
Amine solution purification
Materials of construction
Gas dehydration
- Water content determination
- Glycol dehydration
  - Process description
  - Choice of glycol
  - Design considerations
  - System sizing
  - Glycol-powered pumps
- Solid bed dehydration
  - Process description
  - Design consideration

Day Five:

Gas processing
- Absorption/lean oil
- Refrigeration
- Choice of process
Compressors
- Types of compressors
- Specifying a compressor
- Reciprocating compressors process considerations
- Centrifugal compressors process considerations
Mechanical design of pressure vessels
- Design considerations
- Inspection procedure
- Specification and design of pressure vessels
Pressure relief
- Relief requirements
- Type of devices
- Valve sizing
- Installation
Valves, fittings, and piping details
- Valve types
- Chokes
- Piping design considerations

Summary Open and Close Forum

NOTE:

Pre & Post Tests will be conducted

Case Studies, Group Exercises, Group Discussions, Last Day Reviews &Assessments will

be carried out.

Certificate

Define Management Consultancy & Training Certificate of course completion will be issued to all attendees.

Methodology

A highly interactive combination of lectures and discussion sessions will be managed to maximize the amount and quality of information and knowledge transfer. The sessions will start by raising the most relevant questions, and motivate everybody to find the right answers. The delegates will also be encouraged to raise their questions and to share in the development of the right answers using their analysis and experiences.

30% of Lectures
30% Workshops and work presentation
20% Group Work& Practical Exercises
20% Videos& General Discussions

Course Details