Course Details

Objective

Upon completion of this course, participants will have gained a solid understanding of the key elements associated with the design, operation and troubleshooting of desulfurization units. This will include the impact of feed quality, catalyst, operating conditions and unit design on product qualities. In addition they will have gained some valuable insight into how to optimize, debottleneck and troubleshoot their desulfurization units.

TRAINING OUTCOME

•  Overview of the Catalytic Processes in a Refinery, with a special emphasis on Hydrotreatment Systems.
•  Catalyst Evaluation Techniques. An understanding of Reactor and Catalyst interaction.
•  The operation, control and troubleshooting of a reactor and associated heaters, heat exchangers and distillation equipment.
•  An overview of reactors, practical solutions as well as theory.
•  An understanding of essential reaction concepts.
•  Valuable practical insights for trouble free design and field proven techniques for commissioning, start up and shutdown of reactor,exchanger and    distillation operations.
•  To tailor your approach to specific design, analysis and troubleshooting problems

Content

Daily Outline

DAY 1

Course Introduction and Pre-Test

Introduction to Desulfurization Technology

• Refinery Overview
• HDS role in a refinery: aim of the various treatments with hydrogen and integration in the refining scheme
• Impurities in petroleum cuts and products, their impact on health, environment and on other refining processes
• Recent regulations and future trends: quality specifications of petroleum products and fuels

Desulfurization reactions

•  Characteristics of the chemical reactions
•  Thermodynamic and kinetic aspects
•  Consequences on the operation of units
•  Side reactions and optimum operating conditions to deplete their evolution
•  Specific features of reversion reactions

Desulfurization unit design basics and safety

• Unit design features
• Compositions of the main streams; mass balance and yields, sulfur balance,  hydrogen balance and consumption

Case Study

Q&A Session for Day 1 Topics

DAY 2

Operation, Monitoring and Troubleshooting

• Operating conditions and compositions of the main streams; mass balance and  yields, sulfur balance, hydrogen balance and consumption
• Significance of the operating variables and their influence on the process: meantemperatures and profile, pressures, partial pressure of hydrogen, recycle rate, quench ratio, feed flow rate and space velocity
•  Advanced process control and optimization of the process
•  Catalyst follow up and cycle length optimization, ageing and deactivation
•  Reaction Selectivity
•  Regeneration steps and monitoring
•  Maximizing the performances of the unit under constraints or limit conditions
•  Revision of the Basics: FCC Naphtha Treating for Clean Fuels

Case Study

Q&A Session for Day 2 Topics

DAY 3

Catalysis

• Nature of HDS Catalysts
• Composition and activity
• Catalyst selection and reactor loading diagrams
• Multi-catalyst Systems
• Pre-sulfiding procedures: role, steps and details of the different methods
• Catalyst deactivation
• Catalyst Regeneration

Catalyst Management

• Reactor loading and unloading, catalyst handling
• Reactor Distribution and Internals
• Effects of poor distribution
• Developments in internals design
• Pressure drop management

Case Study
Q&A Session for Day 3 Topics

DAY 4

Performance of the various Desulfurization units

For each of the following processes, the operating parameters and the specific operating features are addressed:

• Naphtha desulfurization for catalytic reformer and isomerization feed.
• Cracked gasoline treatments, special hydrotreatments for the FCC gasoline.
• Stabilization of the pyrolysis gasoline.
• Hydroisomerization of the C4 cut out of the FCC to feed alkylation unit.
• Hydrotreatment of middle distillates: kerosene and gas-oil, LCO processing.
• Desulfurization of vacuum gasoil to FCC units.
• Residues demetallization processes.
• Ultra-low Sulfur Gasoline & Diesel Fuels.

Start-up, Shutdown and Troubleshooting

• Startup/Shutdown procedures
• Causes of quality decrease and corresponding actions.
• Main automatic safety systems.
• Feed pump failure, heater failure.
• Compressor failure: fresh gas or recycle, adapted reaction and safe shutdown.

Case Study

Q&A Session for Day 4 Topics

DAY 5

Refinery Hydrogen Balance

• Using Hydrogen wisely
• HPU options

Equipment Design and Process Debottlenecking

• Reactors, exchangers, separators, strippers, compressors
• Design options
• Typical bottlenecks

Ultra-low Sulfur Gasoline & Diesel Fuels

• Specific developments to specifications

Case Study

Q&A Session for Day 5 Topics

Course Closing and Final Test

NOTE:
Pre & Post Tests will be conducted
Case Studies, Group Exercises, Group Discussions, Last Day Review & Assessments will be carried out.

Methodology

A highly interactive combination of lectures and discussion sessions will be managed to maximize the amount and quality of information and knowledge transfer. The sessions will start by raising the most relevant questions and motivate everybody find the right answers. You will also be encouraged to raise your own questions and to share in the development of the right answers using your own analysis and experiences.  Tests of multiple-choice type will be made available on daily basis to examine the effectiveness of delivering the course.

Very useful Course Materials will be given.

• 30% Lectures
• 30% Workshops and work presentation
• 20% Group Work& Practical Exercises
• 20% Videos& General Discussions